Ctek

-

PurpleLine

-

Obelink

-

DHC

-

Tecmate

-

Xenteq

-

Studer

-

Truma

-

Optima

-

Ojop

-

Winterhoff

-

CaravanMoverShop

-

Reich

-

VMF

-

PowrMover

-

AL-KO

-

CaravanMoverShop

-

Victron

-

PowerXtreme

-

gimeg

-

Enduro

-

P1mover

-

Simpark

-

MVP

-

Kronings

-

The company Truma

Website Truma
Truma is a German company, founded in 1949. It has grown with its gas-related products. The company has 400 employees and is active in more than 30 countries. It develops and designs new products on their own. It is mostly known for its gas boilers and heating systems found in most caravans. A long time ago Truma took over Carver /Euromover company, the inventor of the mover. Some years ago they acquired PowrWheel/PowrMover. Different Truma movers are assembled in Munich, Germany.

The Truma Mover Go2 RH2 is for caravans with single axle caravans. The electronics have a softstart and stopfunction. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control (868 MHz) with turnable and slider (2-handed operation).. You can turn the caravan around the axle.

Technic

This is a semi-automatic mover. A 120 degree rotation of a wrench – and some manpower – is needed to apply the drive rollers to the caravan tyres. The actuation of the rollers is simple. With the provided crossbar both sides press simultaneous in the tires. The distance traveled when swiveling is 4 cm. De rollen staan ongeveer 2 cm van de band afgesteld, de druk van de rol in de band is dus maximaal 2 cm. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope.

The manufacturer recommends this mover for caravans up to 1800 kg /15%. We expect with our advise taking a short slope of 20% should be no problem, thus our advise with our set 2 for this mover is for caravans with a maximum weight of 1500 kg. The actual weight of the mover itself (our measurement) without battery is approximately 34 kg.

The height for the installation is 16 cm. The loss of ground clearance after installation with an appropriate chassis is 5.5 cm. The mover needs an installation length of 34 cm. The drive motor has 2 Motor brushes. The mover is introduced in 2017.

Warranty

On this product you have 2 years guarantee. And in total 2 years warranty, if the mover is fitted by us! We also give you up to 2 years Guarantee if the mover is self-fitted (only at CaravanMoverShop)

installation dimensions:

Mover Go2 RH2 fitted (the looks of every caravan is different):

The Truma Mover Go2 RH3 is for caravans with single axle caravans. The electronics have a softstart and stopfunction. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control (868 MHz) with turnable and slider (2-handed operation).. You can turn the caravan around the axle.

Technic

This is a semi-automatic mover. A 120 degree rotation of a wrench – and some manpower – is needed to apply the drive rollers to the caravan tyres. The actuation of the rollers is simple. With the provided crossbar both sides press simultaneous in the tires. The distance traveled when swiveling is 4 cm. De rollen staan ongeveer 2 cm van de band afgesteld, de druk van de rol in de band is dus maximaal 2 cm. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope.

The manufacturer recommends this mover for caravans up to 1800 kg /15%. We expect with our advise taking a short slope of 20% should be no problem, thus our advise with our set 2 for this mover is for caravans with a maximum weight of 1500 kg. The actual weight of the mover itself (our measurement) without battery is approximately 34 kg.

The height for the installation is 16 cm. The loss of ground clearance after installation with an appropriate chassis is 5.5 cm. The mover needs an installation length of 34 cm. The drive motor has 2 Motor brushes. The mover is introduced in 2021.

Warranty

On this product you have 2 years guarantee. And in total 2 years warranty, if the mover is fitted by us! We also give you up to 2 years Guarantee if the mover is self-fitted (only at CaravanMoverShop)

installation dimensions:

Mover Go2 RH3 fitted (the looks of every caravan is different):

The Truma Mover SX is for caravans with single axle caravans. The electronics have a softstart and stopfunction. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control (868 MHz) with turnable and slider (2-handed operation).. You can turn the caravan around the axle.

Technic

This mover has an operation with comfort. Thus making it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically. This is a semi-automatic mover. A 120 degree rotation of a wrench – and some manpower – is needed to apply the drive rollers to the caravan tyres. The actuation of the rollers is simple. With the provided crossbar both sides press simultaneous in the tires. The distance traveled when swiveling is 4 cm. De rollen staan ongeveer 2 cm van de band afgesteld, de druk van de rol in de band is dus maximaal 2 cm. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope.

The manufacturer recommends this mover for caravans up to 2000 kg /13%. We expect with our advise taking a short slope of 20% should be no problem, thus our advise with our set 2 for this mover is for caravans with a maximum weight of 1800 kg. The actual weight of the mover itself (our measurement) without battery is approximately 35 kg. The mover is low in weight.

The height for the installation is 16 cm. The loss of ground clearance after installation with an appropriate chassis is 5.5 cm. The mover needs an installation length of 35 cm. The drive motor has 2 Motor brushes. The mover is introduced in 2017.

Warranty

On this product you have 2 years guarantee. And in total 5 years warranty, if the mover is fitted by us! We also give you up to 5 years Guarantee if the mover is self-fitted (only at CaravanMoverShop)

installation dimensions:

Mover SX fitted (the looks of every caravan is different):

The Truma Mover XT is for caravans with single axle caravans. The electronics have a softstart and stopfunction. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control (868 MHz) with turnable and slider (2-handed operation).. You can turn the caravan around the axle.

Technic

This mover has an operation with comfort. Thus making it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically. The swiveling of the rollers towards the tire is fully automatic with the pressure on the tires controlled by the electronics. The pressure builds up to 5600 Nm. The distance traveled when swiveling is 4 cm. De rollen staan ongeveer 2 cm van de band afgesteld, de druk van de rol in de band is dus maximaal 2 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the beltwith an included special key. Before use, you have to release the safety switch. On the integrated indicator can be read if the mover is correctly engaged against the tires. The mover has a built-in automatic brake, therefore the caravan does not roll back on a slope.

The manufacturer recommends this mover for caravans up to 2300 kg /13%. We expect with our advise taking a short slope of 20% should be no problem, thus our advise with our set 2 for this mover is for caravans with a maximum weight of 2000 kg. The actual weight of the mover itself (our measurement) without battery is approximately 33 kg. The mover is low in weight. De mover is compact en modern van binnen. De gebruikte motoren zijn koolborstelloos en volgens de fabrikant zodoende uitermate efficiënt. U dient wel met twee handen te besturen. Tijdens het rijden probeert de elektronica de caravan zo recht mogelijk te laten rijden, de afgelegde afstand wordt gecontroleerd (op de rol gemeten) en als er een verschil is tussen links en rechts wordt het gecorrigeerd.



The height for the installation is 13 cm. The loss of ground clearance after installation with an appropriate chassis is 5.5 cm. The mover needs an installation length of 32 cm. The mover is optimailly protected against moisture, so that the risk of malfunctions is minimal when mounted behind the wheels. Use is made of brushless drive motors. The mover is introduced in 2014.

Warranty

On this product you have 2 years guarantee. And in total 5 years warranty, if the mover is fitted by us! We also give you up to 5 years Guarantee if the mover is self-fitted (only at CaravanMoverShop)

installation dimensions:

Mover XT fitted (the looks of every caravan is different):

The Truma Mover Smart A is for caravans with single axle caravans. The electronics have a softstart and stopfunction. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control (868 MHz) with push buttons. You can turn the caravan around the axle.

Technic

This mover has an operation with comfort. Thus making it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. The swiveling of the rollers towards the tire is fully automatic with the pressure on the tires controlled by the electronics. The pressure builds up to 5600 Nm. The distance traveled when swiveling is 4 cm. De rollen staan ongeveer 2 cm van de band afgesteld, de druk van de rol in de band is dus maximaal 2 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the beltwith an included special key. On the integrated indicator can be read if the mover is correctly engaged against the tires. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope.

The manufacturer recommends this mover for caravans up to 2000 kg /13%. We expect with our advise taking a short slope of 20% should be no problem, thus our advise with our set 2 for this mover is for caravans with a maximum weight of 1800 kg. The actual weight of the mover itself (our measurement) without battery is approximately 32 kg. The mover is low in weight.

The height for the installation is 16 cm. The loss of ground clearance after installation with an appropriate chassis is 5.5 cm. The mover needs an installation length of 35 cm. The drive motor has 4 Motor brushes. The mover is introduced in 2020.

Warranty

On this product you have 2 years guarantee. And in total 5 years warranty, if the mover is fitted by us! We also give you up to 5 years Guarantee if the mover is self-fitted (only at CaravanMoverShop)

Mover Smart A fitted (the looks of every caravan is different):

The Truma Mover Smart M is for caravans with single axle caravans. The electronics have a softstart and stopfunction. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control (868 MHz) with push buttons. You can turn the caravan around the axle.

Technic

This mover has an operation with comfort. Thus making it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. This is a semi-automatic mover. A 120 degree rotation of a wrench – and some manpower – is needed to apply the drive rollers to the caravan tyres. The actuation of the rollers is simple. With the provided crossbar both sides press simultaneous in the tires. The distance traveled when swiveling is 4 cm. De rollen staan ongeveer 2 cm van de band afgesteld, de druk van de rol in de band is dus maximaal 2 cm. On the integrated indicator can be read if the mover is correctly engaged against the tires. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope.

The manufacturer recommends this mover for caravans up to 1800 kg /13%. We expect with our advise taking a short slope of 20% should be no problem, thus our advise with our set 2 for this mover is for caravans with a maximum weight of 1800 kg. The actual weight of the mover itself (our measurement) without battery is approximately 33 kg. The mover is low in weight.

The height for the installation is 16 cm. The loss of ground clearance after installation with an appropriate chassis is 5.5 cm. The mover needs an installation length of cm. The drive motor has 2 Motor brushes. The mover is introduced in 2020.

Warranty

On this product you have 2 years guarantee. And in total 5 years warranty, if the mover is fitted by us! We also give you up to 5 years Guarantee if the mover is self-fitted (only at CaravanMoverShop)