AL-KO 4WD Mammut AMS2 TM400
installation dimensions
The AL-KO 4WD Mammut AMS2 TM400 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (2.4 GHz) with joystick.
Technic
The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards. You can also adjust the driving speed dynamically.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire . Before use, you have to release the safety switch. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.
The manufacturer recommends this mover for caravans up to 3000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 3000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 67,00 kg. The mover is relatively low in weight.
The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 0,00 cm. The mover needs an installation length of 48,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2015.
AL-KO 4WD Mammut AMS2 TM400
Parts
Instruction manual etc.
Remote handset etc.
Basic station etc.
Battery Wiring etc.
Complete unit etc.
Clamping plate etc.
Connection pipe etc.
Motorunit etc.
Roller etc.
cover etc.
Release contact etc.
Products
AL-KO 1366380 Clamping plate Spacer Plates
for Mammut AMS1, Mammut AMS2 M20, 4WD Mammut AMS2 TM400
Under mountingOut of stock, it is unknown whether and when this item will be available again.
Reich 227-11451 AL-KO Jack support (2 pieces) (0,80 kg)
Or click here to order a used item (in stock) for € 41,40 Euro and 1 year warranty
Out of stock, it is unknown whether and when this item will be available again.
AL-KO 1366269 Clamping plate under
for Mammut AMS1, Mammut AMS2 M20, 4WD Mammut AMS2 TM400
Under mountingOr click here to order a used item (in stock) for € 46,80 Euro and 1 year warranty
Out of stock, it is unknown whether and when this item will be available again.
AL-KO 1366268 Clamping plate top
for Mammut AMS1, Mammut AMS2 M20, 4WD Mammut AMS2 TM400
Or click here to order a used item (in stock) for € 56,40 Euro and 1 year warranty
Out of stock, it is unknown whether and when this item will be available again.
AL-KO 1224851 S21 Connection pipe Complete set (24,06 kg)
for Mammut AMS1, Mammut AMS2 M20, 4WD Mammut AMS2 TM400
Out of stock, it is unknown whether and when this item will be available again.
Phone and e-mail
CaravanMoverShop: Reviews
| Our confidentiality policies and procedures
| Terms and Conditions
| Colofon
| Contact
Website: Delivery costs | Customer Services | Basket | Dealers
Media: Facebook | Youtube
Branches: NL-Groningen | DE-Huefingen | ES-Malaga
Website: Delivery costs | Customer Services | Basket | Dealers
Media: Facebook | Youtube
Branches: NL-Groningen | DE-Huefingen | ES-Malaga
©2000-2026 CaravanMoverShop