Websites:
☰ menu

CaravanMoverShop


info@CaravanMoverShop.eu or call: de +49(0)77116292937

Our brands


AL-KO |

AL-KO-EP |

PowrMover |

Truma |

Reich |

PowerXtreme |

P1mover |

Simpark |

Kronings |

PurpleLine |

Enduro |

Victron |

Ctek |

Optima |

Ojop |

CaravanMoverShop |

Ebienne |


Reich



The company Reich


Reich


Website Reich
Reich is a German company founded in 1975. Apart from producing movers they built all kinds of caravan accessories. Most water taps in a caravan are from market leader Reich. The factory is located in Eschenburg in the German state Hessen, where 150 employees work. In the Netherlands and UK it has affiliates. The Reich movers are largely made and assembled in Germany. Here at CaravanMoverShop we have visited Reich premises in Eschenburg many times, to help them to develop the EasyDriver product range.

Reich EasyDriver


The EasyDrivers are the third generation Reich movers. There are four models, the semi-automatic Basic and Active and the fully-automatic Infinity and Pro. With the Basic and Active you connect the rollers to the tire by means of a pendulum movement. This is lighter than pivoting the claws. The difference between the Basic and the Active is that the Active uses a water-resistant plastic cover. These models have three power varieties for a single-axis caravan. The numbers refer to the maximum weight in tons, the 1.6 (1600 kg), the 2.0 (2000 kg) and the 2.3 (2300 kg). The Reich EasyDriver 2.3 models are the most powerful movers we offer.
Some caravans with a BPW chassis allow the fitting of a Reich Pro BPW with minimal loss of ground clearance. The chassis needs to have a special space to fit the mover. This chassis has been on the market for a few years but is to be found mostly underneath the Hobby caravan model 2017 and onwards. All EasyDrivers use comfort remote control handsets allowing you to steer to the left and right while maneuvering the caravan. The rollers have a good grip on the tires. The weight of the mover itself is approximately 33 kg.



Don’t save on the battery and charger!


monteur CaravanMoverShop
After you have chosen the right mover, the next step will be the selection of a battery and charger. Generally a mover provides more power than a small car. All necessary energy is supplied by the battery. If the mover doesn’t get enough energy, sufficient power will be unavailable. There will be more wear and the lifespan of the mover will be shorter. We only sell batteries that we have tested and we are conservative and careful in our advice. In association with ACSI Freelife magazine we’ve tested different batteries with different techniques. The Optima Yellow Top AGM batteries performed well on a track of 90 meters with a gradient of 6%. The Reich MPP achieved the same. All other standard wet, calcium and cheap AGM batteries didn’t reach this distance. This despite the fact that the manufacturer stated that the batteries could deliver 70, 90 or even 110 Ah. Of course we were also interested in the long-term performance of the Optima Yellow Top 55Ah battery. Hence, we tested a 7 years old Optima battery. It drove the distance without any difficulty. So the difference in performance cannot be explained by the capacity of the battery but in the maximum delivery of energy. Most batteries cannot deliver the energy that is needed. We deliberate choose only a few battery brands and types.

Lithium maximum weight saving!


We sell three types of lithium batteries. Manufacturer Reich has the most experience with the MPP, and you will obtain maximum weight saving. Manufacturer PowerXtreme has the best prices. With the X10 you will obtain maximum weight saving. And with the PowerXtreme X30 you save weight and you can use it for a board network connection because it has more capacity.




Reich EasyDriver Basic 1.6


Reich EasyDriver Basic 1.6

installation dimensions


Reich EasyDriver Basic 1.6 installation dimensions

The Reich EasyDriver Basic 1.6 is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons. You can make the caravan turn around the axis.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.This is a semi-automatic mover. The mover is turned against the tires with a hand crank. The mover slides forward 5,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 3,00 cm. The integrated indicator shows whether the mover has been placed correctly against the tires. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 1600 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 1550 kg. The actual weight of the mover itself (measured by us) without battery is approximately 33,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,70 cm. The mover needs an installation length of 36,00 cm. The metal parts are galvanized. The drive motor has 2 Motor brushes. The mover was introduced in 2021.


installation dimensions


reich-easydriver-basic-1.6-schemaReich EasyDriver Basic 1.6 installation dimensions



Video Reich EasyDriver Basic 1.6




Video Reich EasyDriver Basic 1.6





Reich EasyDriver Active 2.0


Reich EasyDriver Active 2.0

installation dimensions


Reich EasyDriver Active 2.0 installation dimensions

The Reich EasyDriver Active 2.0 is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons. You can make the caravan turn around the axis.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.This is a semi-automatic mover. The mover is turned against the tires with a hand crank. The mover slides forward 5,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 3,00 cm. The integrated indicator shows whether the mover has been placed correctly against the tires. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 1550 kg. The actual weight of the mover itself (measured by us) without battery is approximately 33,00 kg. The mover is relatively low in weight.

The height for the installation is 13,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,70 cm. The mover needs an installation length of 36,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2021.


installation dimensions


reich-easydriver-active-2.0-schemaReich EasyDriver Active 2.0 installation dimensions



Video Reich EasyDriver Active 2.0




Video Reich EasyDriver Active 2.0





Reich EasyDriver Active 2.3


Reich EasyDriver Active 2.3

installation dimensions


Reich EasyDriver Active 2.3 installation dimensions

The Reich EasyDriver Active 2.3 is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons. You can make the caravan turn around the axis.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.This is a semi-automatic mover. The mover is turned against the tires with a hand crank. The mover slides forward 5,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 3,00 cm. The integrated indicator shows whether the mover has been placed correctly against the tires. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2300 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 2000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 35,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,70 cm. The mover needs an installation length of 36,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2018.


installation dimensions


reich-easydriver-active-2.3-schemaReich EasyDriver Active 2.3 installation dimensions



Video Reich EasyDriver Active 2.3




Video Reich EasyDriver Active 2.3





Reich EasyDriver Pro 2.0 BPW-Hobby Fan


Reich EasyDriver Pro 2.0 BPW-Hobby Fan
The Reich EasyDriver Pro 2.0 BPW-Hobby Fan is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons. You can make the caravan turn around the axis.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 5,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 3,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire with an included special key. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 1550 kg. The actual weight of the mover itself (measured by us) without battery is approximately 34,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 2,00 cm. The mover needs an installation length of 35,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2021.



Video Reich EasyDriver Pro 2.0 BPW-Hobby Fan




Video Reich EasyDriver Pro 2.0 BPW-Hobby Fan





Reich EasyDriver Pro 2.0 Fan Edition


Reich EasyDriver Pro 2.0 Fan Edition
The Reich EasyDriver Pro 2.0 Fan Edition is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons. You can make the caravan turn around the axis.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 5,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 3,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire with an included special key. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 1550 kg. The actual weight of the mover itself (measured by us) without battery is approximately 31,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,70 cm. The mover needs an installation length of 35,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2021.



Video Reich EasyDriver Pro 2.0 Fan Edition




Video Reich EasyDriver Pro 2.0 Fan Edition





Reich EasyDriver Pro 2.0 BPW-Hobby


Reich EasyDriver Pro 2.0 BPW-Hobby
The Reich EasyDriver Pro 2.0 BPW-Hobby is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons. You can make the caravan turn around the axis.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 5,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 3,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire with an included special key. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 1550 kg. The actual weight of the mover itself (measured by us) without battery is approximately 34,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 2,00 cm. The mover needs an installation length of 35,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2021.



Video Reich EasyDriver Pro 2.0 BPW-Hobby




Video Reich EasyDriver Pro 2.0 BPW-Hobby





Reich EasyDriver Pro 2.0


Reich EasyDriver Pro 2.0

installation dimensions


Reich EasyDriver Pro 2.0 installation dimensions

The Reich EasyDriver Pro 2.0 is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons. You can make the caravan turn around the axis.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 5,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 3,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire with an included special key. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 1550 kg. The actual weight of the mover itself (measured by us) without battery is approximately 31,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,70 cm. The mover needs an installation length of 35,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2021.


installation dimensions


reich-easydriver-pro-2.0-schemaReich EasyDriver Pro 2.0 installation dimensions



Video Reich EasyDriver Pro 2.0




Video Reich EasyDriver Pro 2.0





Reich EasyDriver Infinity 2.5 BPW-Hobby V2


Reich EasyDriver Infinity 2.5 BPW-Hobby V2

installation dimensions


Reich EasyDriver Infinity 2.5 BPW-Hobby V2 installation dimensions

The Reich EasyDriver Infinity 2.5 BPW-Hobby V2 is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons. You can make the caravan turn around the axis.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 7,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 5,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire with an included special key. Before use, you have to release the safety switch. The mover has a built-in automatic brake, therefore the caravan does not roll back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 8 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2500 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 2000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 36,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 3,00 cm. The mover needs an installation length of 36,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2020.


installation dimensions


reich-easydriver-infinity-2.5-bpw-schemaReich EasyDriver Infinity 2.5 BPW-Hobby V2 installation dimensions



Video Reich EasyDriver Infinity 2.5 BPW-Hobby V2





Reich EasyDriver Infinity 2.5 V2


Reich EasyDriver Infinity 2.5 V2

installation dimensions


Reich EasyDriver Infinity 2.5 V2 installation dimensions

The Reich EasyDriver Infinity 2.5 V2 is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons. You can make the caravan turn around the axis.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 7,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 5,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire with an included special key. Before use, you have to release the safety switch. The mover has a built-in automatic brake, therefore the caravan does not roll back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 8 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2500 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 2000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 33,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,50 cm. The mover needs an installation length of 36,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2020.


installation dimensions


reich-easydriver-infinity-2.5-schemaReich EasyDriver Infinity 2.5 V2 installation dimensions



Video Reich EasyDriver Infinity 2.5 V2




Video Reich EasyDriver Infinity 2.5 V2





Reich EasyDriver Infinity 2.5 V2 Fan Edition


Reich EasyDriver Infinity 2.5 V2 Fan Edition
The Reich EasyDriver Infinity 2.5 V2 Fan Edition is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons. You can make the caravan turn around the axis.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 7,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 5,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire with an included special key. Before use, you have to release the safety switch. The mover has a built-in automatic brake, therefore the caravan does not roll back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 8 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2500 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 2000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 33,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,50 cm. The mover needs an installation length of 36,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2025.



Video Reich EasyDriver Infinity 2.5 V2 Fan Edition




Video Reich EasyDriver Infinity 2.5 V2 Fan Edition





Reich 4WD EasyDriver Active 2.8


Reich 4WD EasyDriver Active 2.8

installation dimensions


Reich 4WD EasyDriver Active 2.8 installation dimensions

The Reich 4WD EasyDriver Active 2.8 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.This is a semi-automatic mover. The mover is turned against the tires with a hand crank. The mover slides forward 5,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 3,00 cm. The integrated indicator shows whether the mover has been placed correctly against the tires. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2800 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 2500 kg. The actual weight of the mover itself (measured by us) without battery is approximately 66,00 kg. The mover is relatively low in weight.

The height for the installation is 13,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,70 cm. The mover needs an installation length of 36,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2018.


installation dimensions


reich-easydriver-active-2.8-schemaReich 4WD EasyDriver Active 2.8 installation dimensions



Video Reich 4WD EasyDriver Active 2.8




Video Reich 4WD EasyDriver Active 2.8





Reich 4WD EasyDriver Pro 2.8 Fan Edition


Reich 4WD EasyDriver Pro 2.8 Fan Edition

installation dimensions


Reich 4WD EasyDriver Pro 2.8 Fan Edition installation dimensions

The Reich 4WD EasyDriver Pro 2.8 Fan Edition is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 5,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 3,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire with an included special key. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2800 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 2500 kg. The actual weight of the mover itself (measured by us) without battery is approximately 62,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,70 cm. The mover needs an installation length of 35,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2025.


installation dimensions


reich-easydriver-pro-2.8-fan-schemaReich 4WD EasyDriver Pro 2.8 Fan Edition installation dimensions




Reich 4WD EasyDriver Pro 2.8


Reich 4WD EasyDriver Pro 2.8

installation dimensions


Reich 4WD EasyDriver Pro 2.8 installation dimensions

The Reich 4WD EasyDriver Pro 2.8 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 5,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 3,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire with an included special key. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 6 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2800 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 2500 kg. The actual weight of the mover itself (measured by us) without battery is approximately 62,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,70 cm. The mover needs an installation length of 35,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2014.


installation dimensions


reich-easydriver-pro-2.8-schemaReich 4WD EasyDriver Pro 2.8 installation dimensions




Reich 4WD EasyDriver Infinity 3.5 V2


Reich 4WD EasyDriver Infinity 3.5 V2

installation dimensions


Reich 4WD EasyDriver Infinity 3.5 V2 installation dimensions

The Reich 4WD EasyDriver Infinity 3.5 V2 is for Twin axle caravans (4 WD). The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (434 MHz) with push buttons.

Technic


The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 4500 Nm. The mover slides forward 7,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 5,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire with an included special key. Before use, you have to release the safety switch. The mover has a built-in automatic brake, therefore the caravan does not roll back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 8 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 3500 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 3000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 66,00 kg. The mover is relatively low in weight.

The height for the installation is 12,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,50 cm. The mover needs an installation length of 36,00 cm. The metal parts are galvanized. The mover is optimally protected against moisture, so that the risk of malfunctions is also minimal when mounted behind the wheels. The drive motor has 2 Motor brushes. The mover was introduced in 2020.


installation dimensions


reich-easydriver-infinity-3.5-schemaReich 4WD EasyDriver Infinity 3.5 V2 installation dimensions



Video Reich 4WD EasyDriver Infinity 3.5 V2







Reich


Spare parts


If you have damage, or if there are problems after the warranty period, the brands PowrMover, Reich, Truma, and AL-KO offer an almost complete range of spare parts. So, if you have a small problem after the warranty period, you don't have to buy a whole new mover. You can often solve the problem with a separately ordered spare part. The spare parts of most movers are guaranteed available for 10 years. In addition, we have the most extensive range spare parts used and new in stock.


Warranty Reich


The name of our company CaravanMoverShop clearly indicates what we do, we sell and install caravan movers. Movers of brands like Truma, Reich, and AL-KO. Furthermore we sell high quality batteries and battery chargers. At first, the purchasing price of these products seems higher, but this reflects the high quality of the parts and materials used. Advantages you benefit from as these products are less prone to break down and last longer. The fitting of a mover underneath a caravan requires skillful craftsmanship. That's where CaravanMoverShop makes the difference. A well-fitted mover improves a flawless operation and maximum longevity. Which mover you choose depends on the type of caravan, the layout of the mover and specifications, like ease of use. We will be happy to give you our professional advice based on our experience and we offer the best after-sale service and support.


Phone and e-mail