Truma Smart A
Full-automatic mover
International version (2026)
Complete set O55 (Optima 55 Ah)
Mover with installationset and optimal warranty

Truma Smart A
Full-automatic mover
International version (2026)
Complete set O55 (Optima 55 Ah)
Mover with installationset and optimal warranty

Complete set O55 (Optima 55 Ah)

Ojop 4703062 Quick release battery connector set

Optima Yellow Top YT S4.2 55Ah

CaravanMoverShop Installation set

Ctek 56-855 Multi XS 5.0 Polar

CaravanMoverShop battery holder

CaravanMoverShop Mainswitchcomplete with key, protection caps and connector

Delivery and Features

• Truma Smart A

  
  
• Features:
• You can use this battery set +/- 35 min. maneuver with the mover.
• Comfortcontrol with Softstart and Softstop
• Full-automatic mover
• Light weight Mover
• Topsafe, self-braking on a slope
• Delivery:
• 1x Remote control handset with battery
• 2x Motor (left and right) with cables
• 1x pipe long
• 1x Basic station
• Cable and fuse with holder
• Mounting kit
• Instruction manual
• Ojop 4703062 Quick release battery connector set
• Optima Yellow Top YT S4.2 55Ah
• CaravanMoverShop Installation set
• Ctek 56-855 Multi XS 5.0 Polar
• CaravanMoverShop battery holder
• CaravanMoverShop Mainswitchcomplete with key, protection caps and connector

Truma Mover Smart A

The Truma Mover Smart A is for single axle caravans. The electronics are equipped with a soft start and stop function. This makes manoeuvring the caravan gently and has less effect on the chassis. Manoeuvring is done with a remote control. (868 MHz) with push buttons. You can make the caravan turn around the axis.

Technic

The mover has comfort control. This makes it possible to adjust the caravan a little left or right while manoeuvring forwards and backwards.The mover goes to the tires fully automatically, with the pressure on the tires being controlled by the electronics.
The pressure builds up to 5600 Nm. The mover slides forward 4,00 cm. The rollers are adjusted about 2 cm from the tire, so the pressure of the roller in the tire is maximum 2,00 cm. The actuator motor automatically stops as soon as the pressure is sufficient or as soon as the mover has been pushed fully forward. In case of a completely discharged or defective battery, the mover can easily be removed from the tire with an included special key. The integrated indicator shows whether the mover has been placed correctly against the tires. The mover has a worm wheel transmission that prevents the caravan from rolling back on a slope. The wear-resistant maintenance-friendly aluminium drive rollers have a diameter of 7 cm, which ensures optimum grip on the tires.

The manufacturer recommends this mover for caravans up to 2000 kg. It is important to us that taking a short slope of 20% should not be a problem, so we recommend this mover with our set O55 up to a maximum weight of 2000 kg. The actual weight of the mover itself (measured by us) without battery is approximately 32,00 kg. The mover is relatively low in weight.

The height for the installation is 16,00 cm. The loss of ground clearance after installation with an appropriate chassis is 5,50 cm. The mover needs an installation length of 35,00 cm. The drive motor has 4 Motor brushes. The mover was introduced in 2020.

Video Truma Mover Smart A

Foto Truma Mover Smart A

Weinsberg Cara One 390 QD (2022) 1350 kg

Dethleffs 510 (2019) 1800 kg

Dethleffs Aero Up 530 KR (2023) 1800 kg

Hobby Maxia 585 UL (2023) 2000 kg

Weinsberg CaraOne 480 EU (2025) 1500 kg

Buerstner Averso Plus 520 TL (2020) 1600 kg

Hobby Beachy 420 (2023) 1200 kg

Weinsberg CaraOne 480 EU (2025) 1500 kg

Adria Adora 542 ul (2023) 1900 kg

Tabbert 560 TDL (2015) 2000 kg

Buerstner Premio Life 415 TK (2024) 1350 kg

Knaus W01 Suedwind (2025) 1800 kg

Dethleffs C-Joy 480 FSH (2021) 1500 kg

Hobby De Luxe Edition 495 UL (2019) 1800 kg

Dethleffs Aero 490 QDK (2023) 1800 kg

Demonstration days CaravanMoverShop

You are most welcome during one of our demonstration and information days. On these days, the Movers of Truma, Reich and Al-Ko are shown. You can also convince yourself of the advantages of the Optima and Ctek products. We also show the lightweight lithium batteries from Victron, Reich and PowerXtreme.
You can also see us at one of the exhibitions in Western Europe.
The following promotiondays are on:

Impression CaravanMoverShop at the fair

You can find us at the following exhibitions:
2026 August
DE-Duesseldorf, 28-08-2026 - 06-09-2026, Caravan Salon
     standnummer 14B47

2026 November
DE-Bremen, 06-11-2026 - 08-11-2026, Caravan Bremen
DE-Leipzig, 18-11-2026 - 22-11-2026, Touristik und Caravaning

2027 January
DE-Oldenburg, 15-01-2027 - 17-01-2027, CFR, Caravan Freizeit und Reisen
DE-Stuttgart, 16-01-2027 - 24-01-2027, CMT
NL-Leeuwarden, 27-01-2027 - 31-01-2027, Caravana

2027 February
DE-Hamburg, 04-02-2027 - 07-02-2027, Oohh Hamburg
DE-Hannover, 10-02-2027 - 14-02-2027, ABF
DE-Essen, 24-02-2027 - 28-02-2027, Reise und Camping

Advertisements from CaravanMoverShop

In the past we advertised in the following magazines: Camping Cars and Caravaning, Reisemobil, Kampeer en Caravan Kampioen (KCK), ACSI Freelife Magazine and Campingvizier.

ANWB Kampeer en Caravan Kampioen

Camping, Cars and Caravaning

ACSI Freelife Magazine

A28

DCC, Deutsche Camping Club

Autobild

ACSI

Movers? Quality and reliability make the difference!

Lots of modern caravans have a chassis that doesn’t allow the fitting of just any mover. Therefore it’s important to select the most optimal mover for your caravan. In our advice we take into consideration essential topics like: ground clearance, guarantee and optimal positioning. This is done to ensure maximum durability. We also take into account that the mover should be able to climb a wedge with a 25% upward slope. The choice of which mover, brand and model you would like to use is not only dependent on the price, ease of use and design but also on technical restrictions. Below we will give you more information about movers so that you have a good foundation to make a thoughtful decision.

Modern movers

Caravan movers have been on the market since 1998 . During this time manufacturers acquired a lot of know-how. The modern movers we sell have a built-in brake. So if you forget to disconnect the mover from the wheels and try to drive away, the car and caravan will not move. An important safety feature is that the caravan will also stand still on a pitch or slope. This is achieved by the use of a worm gear or as with Truma XT by means of a built-in brake. Modern movers have more powerful engines so that bigger rollers can be used which have better grip and less wear. By means of an optimized transmission these systems achieve better economy. In recent years we sell modern movers only.

Fully-automatic or semi-automatic

We make a distinction between two types of movers; semi- or fully-automatic. The difference is explained by the way the rollers are brought to the tires. Fully-automatic: just press a button on the remote control handset. Semi-automatic: place the rollers manually on the tires.

Weights and loss of ground clearance

The tables below make comparing the different movers easy. In the first table you see the fully automatic movers, in the second table the semi-automatic. In the tables we state the maximum weight that the caravan, including loading, according to the manufacturer may have, and our personal advice. Our personal advice is based on our experience. We want a mover to be able to drive a 25% chock without overloading and without the electric motor having a hard time audibly. This is to achieve a maximum lifespan. Then the installation height is stated. A standard chassis has a height of 18 cm, a less higher mover only means that there is more empty space above the mover. However, if there is a heating pipe or drain at the place where the mover is to be installed, the installation height is very important. The loss of ground clearance is also very important. In our opinion, the space that remains after mounting the mover should be 15 cm. There is no legal standard for this. All data of course subject to changes and measurement errors.

Semi-automatic mover

There are two variants of semi-automatic movers. Truma and PowrMover use a system with a lever, actually a rod, that needs to be pivoted. While making the turn, the mover is pressed against the tires. This activity requires some force. The easiest way to do this is with the Truma Smart M mover for it delivers the right pressure on the tires straight away. However, this means that adjustments might need to be made when changing to another set of tires. The second variant is a crank system that brings the mover to the tires by rotating the lever. Just like turning the paw of the caravan. Thanks to the gearing system, rotating the lever doesn’t require much force. When an optimal fitting is possible we prefer to advise a semi-automatic mover.

Semi-automatic mover single axle caravans

Semi-automatic mover Twin axle caravans

Full-automatic mover

We distinguish two variants of fully-automatic setup systems. The cheapest ones in the market use a little electrical motor to assist with the rotation. The engine runs until the end of the axle is reached. More expensive movers have a built-in intelligence to ensure the right pressure of the rolls on the tires. Theoretically , fully-automatic movers have a greater chance of malfunctioning but this chance is negligible with movers with an intelligent setup system. The pricing of a mover indicates whether it is an intelligent one. In this brochure we only mention intelligent movers.

Full-automatic mover single axle caravans

Full-automatic mover Twin axle caravans

Control

Two kinds of controls are distinguished. Standard control and comfort control. Until a few years ago , every mover used standard control. Precise movement of the caravan was only possible by stopping it at intervals. With comfort control it is possible to adjust a bit to the left or right while moving the caravan to its place. The comfort control is used with the AL-KO Mammut, Truma XT, Truma Smart and the Reich Easydriver.

Weight, measuring is knowing

Getting overloaded is a big problem with lots of caravans. The average weight of a mover amounts to 33 kg. Our best sold battery set, set 2 with the Optima 55Ah battery, weighs 20 kg. To save on weight it is common to look only at the battery. However, to really save weight one should look at the actual weight of the mover. Don’t trust too much on advertisements and don’t forget the mounting plates. Caravans with an AL-KO Vario chassis need a mounting plate of 5 kg, except for the AL-KO Mammut. The weight difference between movers can go up to more than 16 kg. If you really want to save on weight, you need to be objectively well-i nformed.

Our concept: complete sets

After you have decided on a mover, the next step is to choose the right battery
become. This battery also includes a battery charger. For this reason we sell complete sets, which also includes battery holders and clamps. We have different battery sets on offer. We have a suitable battery one for every situation, but we recommend our Set 2. Our lithium batteries are interesting for weight savings. All Batteries sold by us can stay in the caravan in winter. The batteries do not smell during charging and can even be placed under the bed.

Fitting of a caravan mover

It is important that you are well informed about which caravan mover is the best choise for your caravan and your use. The purchase of a mover is a major investment and you naturally want to purchase the most optimal mover for your situation and also that the lifespan is as long as possible. It is important for us that we take enough time to advise, so that we can choose the most optimal mover with you.

It is important that the caravan mover is properly mounted. Various issues must be taken into account during assembly. Proper assembly ensures that the mover lasts longer. In addition, we check with every assembly whether the desired mover is the right mover for your caravan. The fitter takes the time to assemble the mover professionally and neatly. It takes approximately 3 - 4 hours for a complete assembly at home. If you opt for installation in one of our branches, you bring the caravan in the morning and pick it up again at the end of the day. After assembly you will receive a detailed explanation and tips from the technician on how to best operate the mover and how to optimally maintain the battery.

We try to place the battery, battery charger and control box in the desired place. We do our best to make the placement of the products as ideal as possible during assembly. We prefer to install the mover in front of the wheels (the drawbar side). If you have very little pressure on the towbar, we can also place the battery in front of the wheels or, if desired, more to the rear if you have too much pressure on the towbar. When mounted in front of the wheels, the mover remains cleaner while driving, behind the wheels there is much more water and dirt on the mover. Sometimes a mover can only be placed behind the wheels, due to limited ground clearance or obstacles for the wheels. We then recommend a mover in which at least the motor of the mover is shielded as optimally as possible by a hood, so that it is not constantly exposed to water in or out of the engine in bad weather.

After the mover is selected it must be fitted. Before starting the installation, our technician will determine the location of the battery and other accessories with you. The fitters have a lot of knowledge and experience and will advise you about where to install the battery, charger and control box. The right placement improves the weight distribution and ease of use. The lifespan of a mover is dependent on the quality of the fitting. During the fitting we will place an impact-resistant, flexible tube around the cabling under the caravan.


Fitting can be done at one of our 4 branches in NL-Groningen, DE-Huefingen and ES-Málaga. We are specialized in fitting on location, for instance at your home or at a campsite. During the installation our mechanic brings along all necessary tools and accessories making sure the quality of fitting is the same as in our workshop. This service is offered in The Netherlands, Belgium, Luxembourg, Germany, Switzerland, Austria, South of Spain and the North of France. The mover will be assembled completely and delivered fully working. After the fitting you will get all the instructions on how to operate the mover. Together with the mechanic you will learn how to maneuver the caravan and get familiar with it, so you can travel with confidence.

After the from us purchased mover is selected it must be fitted. Before our fitter starts the installation he will show you the location of the battery and other accessories. The fitters have a lot of knowledge and experience and will advise you about where to install the battery, charger and control box. The right placement improves the weight distribution and ease of use. The lifespan of a mover is dependent on the quality of the fitting. During the fitting we will place an impact-resistant, flexible tube around the cabling under the caravan.

Fitting can be done at one of our affiliates. We are specialized in fitting on location, for instance at your home or at a campsite. During the installation our mechanic brings along all necessary tools and accessories making sure the quality of fitting is the same as in our workshop. This service is offered in The Netherlands, Belgium, Luxembourg, Germany, Switzerland, Austria and the North of France. The mover will be assembled completely and delivered fully working. After the fitting you will get all the instructions on how to operate the mover. Together with the mechanic you will learn how to maneuver the caravan and get familiar with it, so you can travel with confidence.

Connection on board network (self-supporting)

Specialized in on-site assembly

Good fitting is important for the service life of a mover. We only have the fitting done by our own fitters who assemble movers every day. With every fitting, we follow the manufacturer's specifications and legal DIN standards. To do this, we try to mount the battery, battery charger and controller in your preferred location. We also provide the 230V connection needed for the battery charger. The cables are routed under the caravan in an impact-resistant, flexible tube. Tips for optimal mover operation and detailed instruction are also included in the complete assembly.

Our fitting at your site is convenient. For only 90 euros more comes our own, experienced Fitter to you nationwide and fits the mover on site. We take everything with us. We don't need a platform for fitting, we even recommend the caravan on the ground leave it and mount it there. Because the weight is only then on the tires and then we can Set the optimum distance between the tires and the drive rollers.


Fitting at home, also in the alps

Procedure for making an appointment

To assemble a caravan mover under your caravan, we need your caravan for a whole working day. You can bring and collect the caravan in consultation.

If you want to have a mover assembled or need advice, you can contact us by email or by telephone. You can call the central number, we do not have telephone numbers for the branches. We ensure that the mover and accessories are present at the installation site. A deposit is not necessary, the payment always takes place after installation. Check in advance whether you can withdraw the entire amount; often the limit has to be increased temporarily.

Explanation and payment

After assembly you will receive a detailed explanation of the operation of the mover. In addition, we explain how you can optimally maintain the battery, we also provide an advice sticker for this. You can leave the battery in the caravan for the entire winter if you follow our advice.

You can then make the payment, this can be done by PIN (only at the locations), cash to the engineer or by transfer with iDeal in the presence of the engineer.

Fitting of a CaravanMover

The mover is delivered completely working. This also means that the battery is charged as soon as you connect the caravan to 230V. If necessary, we also install a wall socket for this. The fitter ensures that the mover is delivered professionally and according to the manufacturer's standards and guidelines. He will consult with you about the most suitable location for the battery, battery charger and control cabinet. The cables come in a flexible tube for protection and an electrical outlet is installed if it is not yet present. When picking up your caravan you will receive a complete explanation with tips on how you can best operate the mover. You can then immediately practice briefly while the technician watches. We assemble in compliance with the legal EN1648 installation standard.

The ground clearance is important; we check the ground clearance and ensure that it is optimal after assembly, so that the mover is not damaged if you drive over a threshold.

check ground clearance

We prefer to check this when the caravan is behind the car.

The controlbox, battery and other parts will be installed on an optimal place for you and us.

And this is what it looks like when the mover is mounted, there is more than enough ground clearance to cross a threshold.

Example of a complete installed AL-KO Mammut which has no external control box.

The mover is mounted under the caravan and the cables are concealed in a flexible tube so that they are well protected. These are connected to the control box. The control box gets its energy from the battery. The battery is properly secured with the mounting frame. The battery is charged by the battery charger. This battery charger gets its energy from a 230V socket, which is also mounted by us if it is not yet present.

The water drain of your caravan will be moved if it gets in the way of the mover to be mounted. When mounting behind the wheels it is possible that you will lose the spare wheel holder and you have to store the tire elsewhere. It is also possible that you will no longer be able to use the AL-KO jack support holders, then you should use a normal car jack from now on. All these activities are included in the price of a complete assembly.

The cables that go to the motors of the mover are concealed in a flexible, impact-resistant tube. This tube is screwed with holders under the caravan. The motor cables are fed through the caravan floor, after which the holes are sealed with a flexible sealant.

Mounting at home

Our engineers can also carry out the assembly at your home for a extra charge. The mechanic takes the mover and all supplies with him in the service car. The mover is mounted in the same way as at one of our workshops. The costs for assembly are the same throughout the country, except for the islands. The installation can also take place at your caravan storage or at any other location.

It is important that the caravan is on a flat surface and that there is at least 1.5 meters of free space (without curb) around the caravan. Furthermore, the fitter must not be in danger due to passing traffic.
We assemble at home in a large part of Europe, prices vary per country.

Planning next assembly on location

Which mover?

The choice of a mover is not only dependent on which mover you want, each mover has properties that determine which is the best choice for you and your caravan. The mover must be optimally mounted so that the chance of problems is as small as possible. In theory you can mount almost any mover under every caravan, but unfortunately it is not that simple in practice. It starts with the question whether the mover should be mounted in front of or behind the wheels. If we mount the mover in front of the wheels, you have less ground clearance after mounting than behind the wheels. Behind the wheels, however, the mover is a very expensive mud flap, which is not good for any product. We recommend installing a mover for the wheels, if this is not possible, then only mount a well-protected mover behind the wheels, which also has optimum warranty conditions.

We always ask which caravan you have during a conversation. This way we try to find out which chassis is under your caravan. We know which chassis is the most common of many caravans. Once this has been determined, we must determine which movers are eligible. Part of this information is in the specifications from the manufacturers. Unfortunately, it is often difficult to compare movers with this data. Where the minimum values are stated by one manufacturer, the maximum values are stated by the other manufacturer. We have a lot of practical experience and can give you good and honest advice based on this experience.

It is not always easy to determine which chassis is under a caravan. Many caravans from 2000 to 2007 have a chassis with a height of 18-20 centimeters, the so-called standard chassis. With this chassis you can mount almost any mover without having to use mounting plates. With other years it is not so easy to say which mover can be mounted. The new chassis in particular does not make it easy for consultants and engineers. New caravans also often have less ground clearance. The caravan is then better on the road in terms of driving experience, but a mover with too little ground clearance is asking for problems.
To help you, we have created a handy overview in which you can select your caravan brand and year of manufacture. You will then be given advice about the options for assembly.

• Which mover?

The power of the mover depends on many factors

Assemble a mover yourself

Schematic drawing confirmation mover

CaravanMover tests

Fitting of a caravan mover

A caravan is mounted on a chassis. However, it is not always clear which chassis is fitted. A mover can be fitted in front or behind the wheels of a caravan according to the specifications of the manufacturer . A mover stays cleaner when it is mounted in front of the wheels, because of this it will lasts longer. It isn’t always possible to place a mover in an optimal position in front of the wheels. This is dependent on the chassis, the ground clearance and other restrictions, like a lower entry or a heating tube. Also, there needs to be enough space between the shock absorber and the tire. Usually the fitting is done with clamping plates.


To attach a clamping plate correctly the chassis has to be made out of one piece and needs to have a relatively straight design. This is what we call a standard chassis


When a mover is fitted, a caravan loses ground clearance, this is the space between the ground and the chassis. With the movers that we sell you will lose 5 -6 cm. This is no problem with a caravan that has enough clearance. Modern caravans are constructed in such a way that two chassis parts are joined together exactly on the spot where the mover needs to be fitted. If the letter M is punched i n the AL-KO chassis, it will be possible to fit a AL-KO Mammut mover without loss of ground clearance. All other movers will require a mounting plate that will cost an extra centimeter ground clearance.


There are many other types of chassis. An Eriba Touring has a very different chassis which limits the choice of an optimal mover drastically. Newer caravans with a BPW chassis allow the fitting of a Reich BPW mover with minimal loss of ground clearance. It is not necessary that you investigate personally which chassis your caravan has and which mover will be optimal. When fitting a mover we always check if it fits optimally. We have everything in stock. Even when fitting at your home we bring all the materials to guarantee an optimal result.

Latest news

• Click here for information about our company and employees.
• CaravanMoverShop Exhibitions in the Netherlands and Germany!
• Which mover?
• Reviews
• Caravan Mover Tests
• Caravan Mover installation
• Battery advice
• Warranty
• Dealers
• Contact
• Information about shipping and payment

Don’t save on the battery and charger!

After you have chosen the right mover, the next step will be the selection of a battery and charger. Generally a mover provides more power than a small car. All necessary energy is supplied by the battery. If the mover doesn’t get enough energy, sufficient power will be unavailable. There will be more wear and the lifespan of the mover will be shorter. We only sell batteries that we have tested and we are conservative and careful in our advice. In association with ACSI Freelife magazine we’ve tested different batteries with different techniques. The Optima Yellow Top AGM batteries performed well on a track of 90 meters with a gradient of 6%. The Reich MPP achieved the same. All other standard wet, calcium and cheap AGM batteries didn’t reach this distance. This despite the fact that the manufacturer stated that the batteries could deliver 70, 90 or even 110 Ah. Of course we were also interested in the long-term performance of the Optima Yellow Top 55Ah battery. Hence, we tested a 7 years old Optima battery. It drove the distance without any difficulty. So the difference in performance cannot be explained by the capacity of the battery but in the maximum delivery of energy. Most batteries cannot deliver the energy that is needed. We deliberate choose only a few battery brands and types.

Lithium maximum weight saving!

We sell three types of lithium batteries. Manufacturer Reich has the most experience with the MPP, and you will obtain maximum weight saving. Manufacturer PowerXtreme has the best prices. With the X10 you will obtain maximum weight saving. And with the PowerXtreme X30 you save weight and you can use it for a board network connection because it has more capacity.

Optima batteries

Optima is the leading brand of Varta, the biggest battery manufacturer in the world. This battery is particularly suitable for heavy applications. An optima battery is 10 kg lighter and significantly smaller than traditional lead-acid batteries. The battery does not contain any fluids, so even when damaged it remains leak-proof. Also, it can be fitted in any position, even upside down. A battery box is not needed and you don’t need to make a drain. This battery has no problem supplying the energy release requested by the mover, so this makes it an optimal combination with any mover. It will last longer than any standard conventional battery. Our experiences are very positive. We have sold these batteries for more than a decade and have never seen a faulty one, as long as the owners followed our charging advice. Obviously, rare manufacturing errors form an exception to the rule. The technique has been in use for quite a long time now, so early mistakes have been eradicated. We strongly recommend the Optima AGM battery, together with a good charger.

Our best and most sold battery set is set 2, with the Optima Yellow Top S4.2/55 Ah battery. If you follow our charging advice this set is virtually fault-free. The battery weighs 19 kg. With this battery you can use the mover for more than 40 minutes. A minimal energy release is necessary for a mover to function optimally. The Optima battery in our set 2 amply meets this minimal norm. You can also use this battery for lighting. We can connect the battery to the board network of your caravan. Our complete set 1 makes use of the smaller Optima S2,7/38 Ah. This battery only weighs 12 kg and its energy release is less than the other Optima batteries. You have approximately 25 minutes maneuvering time. The biggest advantage of this battery is the saving of weight.

Our complete sets 3 and 4

We advise set 3, with the S5.5/75 Ah Optima battery, to the intensive user. This battery is suitable for situations where you don’t have a 230V connection available for a few days. With our set 4 you have a solution for intense self-supporting use. The set includes a Ctek charger which enables charging during driving and the connection to a solar panel. In addition , the mover gets more than enough energy so this set is suitable for heavier applications.

Complete set O38 Ctek 56-855 Multi XS 5.0 Polar (12 kg)

Recommended when need to save on weight.
You can use this battery set +/- 20 min. maneuver with the mover.

Optima Yellow Top YT S2.7 38Ah

Ctek 56-855 Multi XS 5.0 Polar

Complete set O55 Ctek 56-855 Multi XS 5.0 Polar (19 kg)

We recommended this set for normal use. Also optimal for standalone.
You can use this battery set +/- 35 min. maneuver with the mover.

Optima Yellow Top YT S4.2 55Ah

Ctek 56-855 Multi XS 5.0 Polar

PowerXtreme

Complete set X10 PowerXtreme X10 Complete set Bluetooth (2 kg)

Recommended when need to save on weight.
You can use this battery set +/- 10 min. maneuver with the mover.

PowerXtreme X10 Complete set Bluetooth

Complete set X20 PowerXtreme X20 Complete set Bluetooth (4 kg)

Recommended when need to save on weight. Also optimal for standalone.
You can use this battery set +/- 25 min. maneuver with the mover.

PowerXtreme X20 Complete set Bluetooth

Complete set X30 PowerXtreme X30 Complete set Bluetooth (6 kg)

Recommended when need to save on weight. Also optimal for standalone.
You can use this battery set +/- 35 min. maneuver with the mover.

PowerXtreme X30 Complete set Bluetooth

Complete set X60 PowerXtreme X60 Complete set Bluetooth (8 kg)

Recommended when need to save on weight. Also optimal for standalone.
You can use this battery set +/- 70 min. maneuver with the mover.

PowerXtreme X60 Complete set Bluetooth

Complete set X75 Victron BPC121531064R (10 kg)

We recommended this set for intensiv use. Also optimal for standalone.
You can use this battery set +/- 130 min. maneuver with the mover.

PowerXtreme X75 Complete set Bluetooth

Victron BPC121531064R

Complete set X125 Victron BPC121531064R (10 kg)

We recommended this set for intensiv use. Also optimal for standalone.
You can use this battery set +/- 250 min. maneuver with the mover.

PowerXtreme X125 Complete set Bluetooth

Victron BPC121531064R

Complete set X210 Victron BPC122531064 (10 kg)

We recommended this set for intensiv use. Also optimal for standalone.
You can use this battery set +/- 400 min. maneuver with the mover.

PowerXtreme X210 Complete set Bluetooth

Victron BPC122531064

Victron Peak Power Pack

Complete set V20 Victron PPP012020000 (4 kg)

Recommended when need to save on weight. You can charge the battery while driving Also optimal for standalone.
You can use this battery set +/- 25 min. maneuver with the mover.

Victron PPP012020000

Complete set V30 Victron PPP012030000 (6 kg)

Recommended when need to save on weight. You can charge the battery while driving Also optimal for standalone.
You can use this battery set +/- 35 min. maneuver with the mover.

Victron PPP012030000

Complete set V40 Victron PPP012040000 (8 kg)

Recommended when need to save on weight. You can charge the battery while driving Also optimal for standalone.
You can use this battery set +/- 50 min. maneuver with the mover.

Victron PPP012040000

Complete set V100 Victron BAT512110740 (12 kg)

Recommended when need to save on weight. Also optimal for standalone.
You can use this battery set +/- 200 min. maneuver with the mover.

Victron BPC121531064R

Victron BAT512110740

Leave your battery in the caravan during winter!

All the batteries that we sell can stay in the caravan during winter. You only need to follow our charging advice. Just charge it to the maximum and immediately disconnect the clamps afterwards. Every set we sell includes our charging advice, so you know how to maintain your battery optimally.

Connection on board network (Self-supporting)

We can connect our batteries to the board network of your caravan. This connection costs 220,- Euro s, materials included. With this connection you can use the 12V lighting, toilet, taps and pumps even if the caravan is not connected to a 230V network.
This connection works fully automatic ally. When the caravan doesn’t get energy from the car, and is not connected to 230V supply, the energy will be delivered by the mover battery instead. We place a fuse between the mover battery and the board network. This automatic switch doesn’t interfere with your car’s electronics. The battery will not be charged during driving. If you want the battery to get charged while driving we advise our complete set 4.

Optima batteries are not without reason the batteries that are best suited for the mover. The technology is mature, there are no children's diseases. We recommend the use of an Optima AGM-battery. Therefore we provide our mover with a CTEK battery charger. These high-quality chargers were originally developed by Optima and are therefore ideal for these (and other) batteries. Through our many years of experience with batteries and battery chargers we are the only webshop, that is allowed to carry the CTEK-Certified-Specialist logo.



Another AGM-battery has a lower quality than an Optima AGM-battery, the benefits apply only to genuine Optima AGM-batteries. Make sure that you buy an original Optima battery. There are many other batteries that look similar. The name yellow top is not protected so any other battery manufacturer can use this name.
The disadvantage of the higher purchase costs of an Optima battery is completely compensated by the advantages compared to conventional batteries in our opinion. Optima batteries are about 10 kg lighter and considerably smaller. The batteries are spillable, as they contain no liquid. The battery can be mounted in any position, even upside down. You don't need a battery leak bin and no battery drain. The Optima battery has a three times longer life than a conventional battery. Also it can be stored for long periods, without being connected to a charger. Hibernate in the caravan is also no problem, if you fully charge the battery and release the battery clamps.

Warranty Truma

5 years warranty, if the mover is fitted by us!
5 years Guarantee if the mover is self-fitted (only at CaravanMoverShop).
Movers with best price warranty only have 2 years warranty.

Truma has a strict dealer network. We are a registered dealer of this brand.

You can also count on optimal support from the manufacturers and importers. Also during your vacation. We can send you a lost remote control anywhere in the European Union without too much expense. We also have our technicians in a large part of Europe who can help you. We assemble at home in France, Belgium, Germany, Switzerland, Austria and Spain. You can also contact all service points.We always recommend buying a mover with a 5-year warranty. However good the mover is, it hangs under the caravan in all weathers and has to endure a lot from dirt and moisture.
If we assemble the mover, you have a warranty of up to 5 years. If you install it yourself, the manufacturer always gives you a maximum of 2 years warranty.
Only at CaravanMoverShop, the warranty can also be extended to 5 years for self-assembly! For each mover it is stated how long the warranty period is.

Spare parts

If you have damage, or if there are problems after the warranty period, the brands PowrMover, Reich, Truma, and AL-KO offer an almost complete range of spare parts. So, if you have a small problem after the warranty period, you don't have to buy a whole new mover. You can often solve the problem with a separately ordered spare part. The spare parts of most movers are guaranteed available for 10 years. In addition, we have the most extensive range spare parts used and new in stock.

• More information

Price and order

Reviews

2025-08-09, written by Henk T.:
==========
Goedemorgen, Bedankt voor de informatie. Het is gelukt om het probleem op te lossen met behulp van uw informatie. Ik zal de mover inderdaad te vroeg hebben uitgezet waardoor het probleem is ontstaan. Gelukkig kunnen we er weer gebruik van maken en zullen we rekening houden met het niet te vroeg uitzetten van de mover. Nogmaals bedankt . Hartelijke groet Henk T.

2025-05-11, written by Sven J.:
==========
Vielen Dank für Ihre Hinweise, es hat super funktioniert und es ist alles wieder in Ordnung. Wir wünschen Ihnen ein schönes Wochenende und verbleiben mit freundlichen Grüßen aus Wittenberg. Sven J.

2023-05-24, written by Marco M.:
==========
Hallo guten Tag ich wollte mich nur einmal bedanken für den Einbau meines Movers es hat alles geklappt so wie besprochen und es war ein sehr freundlicher Mitarbeiter hier vor Ort. Toller Service Dankeschön und ein schönen Tsg noch. MfG Marko

2023-05-13, written by Wouter K.:
==========
Super, dank voor de fijne en snelle service ;-). Met vriendelijke groet, Wouter K.

2023-05-08, written by Karsten F.:
==========
Hallo ich moechte mal kurz die Gelegenheit nutzen... einfach mal Danke sagen. VIelen Dank fuer die tolle Arbeit beim Mover Einbau. Ihr Monteur hat super tolle Arbeite geleistet. Wir freuen uns jetzt auf eine entspannten Urlaub mit Mover. Liebe Gruesse Fam. F.

2022-10-01, written by Ralf R.:
==========
Hallo :-) ich möchte mich ausdrücklich für den tollen Service bedanken !! Vom ersten Kontakt bis nun zur Montage war das Miteinander immer sehr freundlich, kompetent und nie aufdringlich. Ich werde Sie gerne weiter empfehlen (was ich in diversen FB Gruppen bereits gemacht habe) und wünsche Ihnen weiterhin viel Erfolg und Gesundheit. Mit freundlichen Grüßen Ralf R.

2022-07-13, written by Bjoern W.:
==========
Hallo Herr Hut, ich wollte mich kurz bei Ihnen bedanken! Es hat alles super geklappt! Von unserem ersten Kontakt bis gestern zu Montage! Euer Monteur Robin hat eine sehr gute Arbeit abgeliefert!!! Vielen Dank! Jetzt kann der nächste Urlaub kommen! Viele Grüße ich werde Euch weiter empfehlen!!! Björn W.

2022-07-08, written by Fam. L.:
==========
Es hat alles bestens geklappt vom Bestellen Bezahlen und bis zur Lieferung nur 2 Tage, Super. Auch die Montage war kein Hexenwerk, dank der Beschreibung. Wir sind nach einem Vor und Nachmittag intensiver Arbeit fertig mit der Mover Montage. Alles funktioniert wie es soll. Besten Dank und viele Grüße Wir werden Sie gerne weiter Empfehlen Fam. L.

2022-06-18, written by Lars G.:
==========
Hallo Zusammen. Ich moechte mich gerne wieder bedanken fuer die super Arbeit die Mal wieder geleistet wurde. Es ist jetzt das zweite Mal innerhalb von fuenf Jahren das ich einen Mover bei euch gekauft und verbauen lassen habe. Nach einem anfanglichem Missverstandnis lief dann aber alles wieder super. Von der Bestellung per E Mail und dem ganzen Schriftverkehr der Beratung bis hin zur Montage. Auch da gilt mein besonderer Dank ihrem Mitarbeiter Gerald. Er hat perfekte Arbeit gemacht. Schnell sauber und mit viel Wissen und Strucktur. Er hat sich auch die Zeit genommen mir meine Fragen zu beantworten. Bitte richten sie ihm meinen besonderen Dank aus. Ich bin sehr zufrieden mit dem Ergebnis und werde sie immer weiter empfehlen. Beste Gruesse aus dem Lars G.

2022-06-13, written by Ulli M.:
==========
Hallo Herr Mulder, heute war der Monteur da und hat den Truma Mover montiert. Ich bin hell auf begeistert von den neuen Mover, und der Monteur war sehr nett und sehr freundlich, ein toller Mensch der seine Arbeit versteht. Insgesamt bin ich vom Caravanmovershop mehr als zufrieden und begeistert und ich sagte noch diesen Shop habe ich im Netz durch Zufall gefunden. Mfg U. M.

2022-05-15, written by Maike und Bernd K.:
==========
Hallo CaravanMoverShop, Anbei möchten wir sehr gerne ein Review abgeben. "Hiermit möchten wir uns herzlich beim CaravanMover-Team bedanken. Die Beratung als auch der Einbau des Movers unter unserem Hobby war erstklassisch. Die Beratung - welcher Mover der passende für unseren Wohnwagen ist als auch die anschließende Montage verlief absolut Problemlos. Der Monteur war kompetent und freundlich und hat eine saubere Arbeit durchgeführt. Wir werden sie definitiv weiterempfehlen. Herzliche Grüße aus Norddeutschland Maike und Bernd

2022-05-12, written by Carsten S.:
==========
Liebes Caravanmovershop-team, Letzt Woche waren Sie bei uns in Berlin und haben den Mover Truma Smart A unter unseren Knaus Südwind 460 EU gebaut. Wir sind einfach nur begeistert!!!!! Der supernette und höchst kompetente Monteur Vids Hut hat den Mover in perfekter Qualität und in kürzester Zeit montiert und uns nebenbei auch noch alles hervorragend erklärt. So macht es einfach Spass. Alles funktioniert einwandfrei! Auch Ihr Management mit dem Termin und Ankunftszeit war sehr gut, so konnte man sich super darauf einstellen. Wir können Sie nur weiterempfehlen!!!! Wir bedanken uns ganz herzlich und senden herzliche Grüße auch an Vids, Ihre Familie S.

2022-05-06, written by Alexis W.:
==========
Bonjour Je suis enchanté du conseil de CaravanMoverShop et du professionnalisme de l’installation ! Cordialement AW.

2022-02-17, written by Alexander V.:
==========
Hallo Herr Mulder, Ihr Monteur hat den Mover bereits installiert und in Betrieb genommen. Die Montage wurde perfekt durchgeführt und es wurde mit einer Sauberkeit gearbeitet, welche ich als Weltklasse bezeichnen würde! Ich möchte mich an dieser Stelle nochmals für den reibungslosen Ablauf bedanken. Bitte leiten Sie ein ganz großes Lob an Ihrer Monteur weiter. Besser kann man nicht arbeiten! Nochmals vielen Dank. MFG Alexander V.

2021-07-30, written by Thomas L.:
==========
Hallo Herr Mulder, Ich möchte mich an dieser Stelle noch mal ganz herzlich bei Ihnen bedanken, das wir so kurzfristig einen Montagetermin gefunden haben. Dann steht unserem Urlaub in zwei Wochen nichts mehr im Weg. Nach kurzer Absprache war alles in nur 2 Stunden perfekt erledigt, vielen Dank auch noch mal an Vincent und seinen Sohn, ein tolles Team! Ich werde Sie und Ihre Firma sehr gerne weiterempfehlen, echte Profis, die wissen was sie tun, was heute leider nicht mehr oft der Fall ist!!! Gruss Thomas L.

2021-07-01, written by Michael M.:
==========
Hallo Herr Mulder, ich möchte Ihnen gerne eine Rückmeldung geben. Die Monteure kamen wie angegeben pünktlich bei mir an. Nach einer kurzen Absprache bezüglich der Installations-Möglichkeiten von Batterie und Steuergerät wurde sofort mit der Montage begonnen. Innerhalb 2 Stunden war alles erledigt. So kompetent und freundlich habe ich selten Handwerker gesehen. Es wurde mir alles ausführlich erklärt und vorgeführt. Eine solche Übergabe sucht seines Gleichen!! Ich habe Sie schon weiter empfohlen und werde dies immer wieder machen Den nächsten Mover lasse ich sicherlich wieder von Euch installieren. Vielen lieben Dank für Alles Michael M.

2021-05-26, written by Harald H.:
==========
Hallo Herr Mulder, Vielen Dank für die rasche Lieferung. Ich habe den Mover und die Batterie am Wochenende installiert, es hat gut gepasst, und er funktioniert sehr gut. Beste Grüße aus Tirol, Harald H.

Ordering information

Phone and e-mail

Questions? Please send an Email! We respond quickly. info@CaravanMoverShop.eu
Or use our contact form.

On working days until 17.00:

nl +31(0)85-7843666
de +49(0)771-16292937
nl +31(0)85-7843666
at +43(0)720-519189

ch +41(0)52-5896848
fr +33(0)182-885665
be +32(0)2-8089150
es +34-634345938

Check out our best sellers:
- Truma Mover Smart A
- Reich EasyDriver Basic 1.6
- AL-KO Mammut AMS2 M20

CaravanMoverShop: Reviews | Our confidentiality policies and procedures | Terms and Conditions | Colofon | Contact
Website: Delivery costs | Customer Services | Basket | Dealers
Media: Facebook | Youtube
Branches: NL-Groningen | DE-Huefingen | ES-Malaga

©2000-2026 CaravanMoverShop